The Dental Chair shall have minimum two high Speed Air Rotor terminals with water control on coupling with at least one fiber optic terminal. Should have one Air motor terminal with speed control preferably fibre optic
The Dental Chair shall have minimum two high Speed Air Rotor terminals with water control on coupling with at least one fiber optic terminal. Should have one Air motor terminal with speed control preferably fibre optic, with speed range of 300 – 40000 RPM in standard mode with cutting power in the range between 50 – 70 watt. Should be provided with the Brushless.
| Dental Chair design: | Should enable the operator to be in close proximity of the patient to provide optimum vision of the operating field and safe control of all component devices. |
| Ergonomics | The chair should be designed to provide good ergonomics for both operator and assistant. Chair should have adjustable ergonomic headrest. |
| Power drive for Chair movements: | Dental Chair shall be fully motorized, pneumatically / electrically driven, which gives smooth movement and non-jerky start and stop. |
| Power Input: | 220 – 240 V AC, 50 Hz |
| Power Supply: | Should have integrated power supply for fiber optic handpieces, piezo electric motor etc. |
| Type of Motor: | Noiseless DC Motor for enabling chair movements. |
| Dental Chair Base: | Cast-metal/alloy base with five title castors. |
| Corrosion resistance: | Base and other structure of the Chair should have a corrosion resistant coating. |
| Concealed inlet & outlet: | All the outlet & inlet for the services to the chair shall be concealed in the box. The Box as an infection control measure shall be located at the foot area of the chair or within the unit. |
| Valves: | Provision of Built-in anti-retraction valves and flush valve system for infection control. |
| Usable storable height (minimum) | 840 mm |
| Width | 450 mm to 500 mm |
| Length (minimum) | 1830 mm( 6 feet) |
Enquiry Cart (